vogue effefiq

3. Vogue Effectiq

Bringing in the chic and trendy

Unlock creativity that knows no bounds. Your quest for fashionable walls stops here with the Vogue Effectiq range that spruces up your walls with colour and texture.

Features

1.Easy Wash 2. Germ Block 3. HD Patterns 4. Optimum Design Time

Certifications

  • Compliant to JIS Z 2801: 2012 test for Anti-Bacterial Activity
  • No Fungal Growth as per ASTM D5590:2017
  • Compliant to ISO 21702: 2019 for Anti Viral Activity.
  • Resistance to Household Stains as per ASTM test D4828:94 (2016)

PREPARATION

  • Surfaces to be painted must be clean, dry, and free from seepage,leakage, loose old paint, dirt, dust, grease, oil, soap, wax and otherimpurities
  • Remove any peeling paint and sand these areas to feather edges smooth with adjacent surfaces
  • New plaster or masonry surfaces must be allowed to cure for 28 days before application. Cured plaster should be hard (non-powdery) and in sound condition
  • Growths of fungus, algae or moss should be removed by wire brushing and washing thoroughly with potable water
  • In case of areas having excess dampness, please repair the surface before painting. In case there are structural cracks, please study and repair them with a Structural Engineer
  • Open non-structural cracks in V-groove and fill with cement/crack filler
  • Apply cement/acrylic putty (wherever needed) to fill the dents and level the surface. Sand and smoothen the surface with sandpaper no. 320 and wipe clean before pain.

APPLICATION

ROLLER For best results, use a Short Nap Felt Roller

DILUTION Dilute Halo Majestic Interiors with 25% clean water


ROLLER For best results, use a Mid Nap Roller
DILUTION Dilute Vogue top coat up to 10% of potable water
BASE COAT APPLICATION: Apply specific shade of appropriate base coat of JSW Paints Interior Emulsion Paint as per product


application recommendations. For best results, we recommend Halo Majestic Interiors.**
“PAINT-OFF” EFFECTS: Selective removal of paint by eect finish tool

  • Apply Vogue top coat uniformly over base coat in handy 3X3 patches with mid-nap felt roller. Use the appropriate eect finish tool as per applicable design patterns.

  • “PAINT-OFF” EFFECTS: Selective addition of paint by eect finish tool
  • Apply Vogue top coat uniformly on appropriate tools. Use the paint loaded eect tool as per applicable design patterns

INFORMATION AND CARE

ENVIRONMENTAL HEALTH AND SAFETY

  • Use only with adequate ventilation during application and drying
  • Avoid contact with eyes and prolonged or repeated contact with skin
  • Do not breathe spray mist or sanding dust
  • Use dust mask or nose pad during application, sanding and clean up
  • Close container after each use
  • Wash thoroughly after handling
  • In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
  • In case of skin contact, immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persist
  • No added Lead, Mercury, Chromium, Arsenic and other heavy metals

PRODUCT INFORMATION

Colours White
Tint Bases Clear

KEY DATA

No. of colours 176
Coverage^ 100-180 Sqft/L
Drying Time* 6-8 hours
(30°C @ 60 R/H)
Flash Point Water-based, not applicable
Thin with Water 25%